Making great FOAM is easy with the PRO/pak. Everything you need is contained in one package that attaches to the end of your 1" fire hose.

The PRO/pak has a high impact 2.5 gallon foam reservoir with a built in eductor that can be set to the ratio of foam or wetting agents you use. A large easy-open fill port has an indicator to show the type of liquid in the tank. The flow is controlled by a twist grip valve/carrying handle. One quarter turn will let you select the discharge velocity that meets your needs for inlet pressures between 40 and 500 psi. The nominal flow is 12 gpm at 100 psi. A shoulder strap is included for extended operations.

The PRO/pak Portable Foam System is supplied with three different quick connect nozzles, a hose and a cap.

• The straight stream nozzle gives maximum reach and penetration.
• The low expansion nozzle works well with Class A and B foam solutions where reach is more important than expansion ratio.
• The medium expansion nozzle produces dense foam that is best for vapor suppression and longevity.

The nozzles can be attached directly to the eductor for one handed operation, or a short section of hose can be added for maximum maneuverability

Use the PRO/pak when time is critical, and you need a small blanket of foam. For example with one tank of 1% concentrate the PRO/pak can make 15,000 gallons of finished foam using 250 gallons of water in 21 minutes. Based on 60:1 expansion from the medium expansion nozzle.